Every component isprecision machined, inspected, and hand-assembled.
Innovative Solutions by AgTronics
Innovative Solutions by AgTronics
Every component isprecision machined, inspected, and hand-assembled.
The GolfWorks Industry Standard Double Sided Grip Tape The industry standard tape for installing slip-on or leather grips. Sticky on both sides and activated with solvent. Choose from 18mm wide for spiral winding or 48mm wide for faster length-wise application (preferred by most clubmakers). Available in 36 yard and 18 yard rolls, 10″ pre-cut strips and a 100 pack of 10″x2″ pre-cut strips Grip Tape Roll & StripsAvailable sizes: ↓2″ x 36 yard roll (Actual width 48mm)1″ x 36 yard roll (Actual width 18mm)2″ x 18 yard roll (Actual width 48mm)2″ x 10″ strips (Actual width 48mm)2″ x 10″ strips (100 PACK) The industry standard tape for installing slip-on or leather grips. Sticky on both sides and activated with grip solvent – Package of 100 individual 2″ x 10″ Sticky on both sides and activated with solvent
Included Components : removal tool. Material : Aluminum. Manufacturer : Natupal.
Ultralite Graphite Shaft Extension The GolfWorks graphite shaft extensions for ultralight graphite shafts. The GolfWorks Ultralite extensions are made of a precise mixture of injection-molded Nylon (70%) and carbon fiber (30%) for strength and durability and feature a 2″ insertion depth. The post OD is .535″ and can be sanded to fit most ultralight graphite shafts.Features:5″ total length with 1/2″ and 1″ pre-scored measuring lines for quick and precise extended lengthsDeep vertical grooves allow for greater epoxy adhesion. Vertical grooves also allow for additional sanding without sacrificing epoxy adhesionMade from Nylon and carbon fiber for added strength
Ferrule and Shaft Prepping Tool The Ferrule & Shaft Finishing Tool is a unique dual purpose tool that is used for finishing ferrules to a high gloss finish as well as prepping golf shaft tips prior to installation. To finish and size ferrules, simply apply acetone to the included lint free cloth strips and spin the ferrule on the nylon rollers, while applying moderate pressure. By replacing the lint free cloth strip with 80 grit sand paper, golf shafts can be spun on the nylon rollers to correctly prep the tips prior to assembly. The Ferrule & Shaft Finishing Tool can be vise or bench mounted and comes with a Plastic Squeeze Bottle for acetone dispensing and 3 each of the Lint Free Strips (GW 1CS) and 80 Grit Sand Paper Strips “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”
You Are Purchasing a Brand New The GolfWorks Industry Standard Grip Tape The industry standard tape for installing slip-on or leather grips. Sticky on both sides and activated with solvent. Choose from 18mm wide for spiral winding or 48mm wide for faster length-wise application (preferred by most clubmakers). Available in 36 yard rolls, 18 yard rolls and 10″ pre-cut strips.SIZE OPTIONS:2″ x 36 yard roll (Actual width 48mm) 1″ x 36 yard roll (Actual width 18mm)2″ x 18 yard roll (Actual width 48mm)2″ x 10″ strips (Actual width 48mm) “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”
Fixed loft angle: 10 degrees. Fixed lie angle: 60 degrees.
Golf Club Brass Shaft Tip Swing Weights For Adjust Golf Club Shafts 2 Grams4 Grams6 Grams8 Grams10 Grams The GolfWorks Reusable Brass Tip Weights for steel and graphite shafts are ideal for adding weight to any type of golf club. Available in .335″ for steel wood shafts and .355″ tapered iron shafts and .370″ for parallel tipped steel iron and putter shafts. Brass will not melt like lead when heated so the weights can be reused over and over again. “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”
You are purchacing a brand new Reaming and Boring Vise Hold heads for reaming or boring with the non-marring aluminum clamping jaws. 3/4″ jaws for short or long hosels. Club rests against the protective nylon back plate. Fully adjustable to fit any hosel size. 3/4″ jaws for short or long hosels. Club rests against the protective nylon back plate. Fully adjustable to fit any hosel size. Bolts directly to your drill press. “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”
You Are Purchasing a Brand New Professional Metal Sided Shaft Clamp This durable, heavy duty professional shaft clamp is easy to use. Made of heavy gauge steel on the outside and vulcanized rubber on the inside, it’s a must for every shop. Note: Can be used for graphite shafts. “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”