LOT – Agtronics Fire Protection

Item Tag: LOT

Pack of 6 Lead Tip Weights For Steel/Graphite Golf Shafts Weight 2g/4g/6g/8g/10g

Lead Shaft Tip Weights Sold in packages of 6 weights each.Lead Shaft Tip Weights are epoxied into the shaft tip during assembly to achieve you desired swingweight. Available for steel .335″ wood (Note: The .335″ lead tip weights will also work in .355″ taper tip steel shaft tips), steel .370″ iron and most graphite shafts. The shaft tip weights fit a maximum .285” inside diameter for steel wood shafts, .312” inside diameter for steel iron shafts and .148” diameter for both iron and wood graphite shafts. “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”

New ! Golf Club Counterweights

Golf Club Shaft Adaptor Epoxy Adhesive 14ml Syringe Black Choose Quantity

Golf Club Shaft Adaptor Epoxy Adhesive 14ml Syringe Black Enhanced Bonding: Specifically formulated for graphite golf shafts and milled aluminum hosel adaptors.Quick Gel Time: Gel time of 30 minutes.Fast Cure Time: Cures to playable strength in 90 minutes.Color: White.Coverage: 14ml syringe assembles 12-14 adaptors.

Maximum Strength Tour Set 20FC Epoxy Super Quick Golf Club Shafting Epoxy

The GolfWorks Maximum Strength Tour Set 20FC Epoxy The Maximum Strength Tour Set 20FC is the next generation of rubber toughened super quick set epoxy that is a must have for any golf club assembly/repair shop. When you absolutely need to affix a club head or two to a shaft in hurry, the 20FC epoxy has a very short pot life of 4 to 5 minutes and will reach full cure in 20 minutes when used in controlled temperatures (70 to 80 degrees). The 20FC features a Lap Shear strength of 3,500 psi which is far superior to any other super quick set epoxies. Couple the 20FC’s super high Lap Shear strength with the FC20’s rubber based flexibility, superior vibration/shock resistance and you have a super quick set epoxy that can truly be trusted for any shafting or reshafting job. Features:Next Generation, Rubber Toughened EpoxySuperior Vibration/Shock ResistanceSets in 4 to 5 MinutesReaches Full Cure Strength in 20 MinutesIncredible 3,500 Lap Shear Strength

GolfWorks Multi-Purpose Tour Set Plus Epoxy for Golf Clubs Brand New

You Are Purchasing a Brand New The GolfWorks Tour Set Plus Epoxy All the convenience and bonding strength of the standard Tour Set, but with a gel time of 25-35 minutes, allowing for more clubs to be done with one mix. Cures to playing strength in 60 to 90 minutes, depending on temperature. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Golf Club Double Sided Aluminium Shaft Extension Fits .600 Butt Steel Shafts New

Double Sided Aluminum Shaft Extension The GolfWorks Double Sided Aluminum extension for steel shafts features dual swedged ends with an exteneded .600″ parallel mid section for a more economical option when extending more than one golf shaft. The swedged ends are designed to perfectly fit into most steel shafts with a .600″ butt diameter. The aluminum extension can be sanded to fit slightly smaller internal butt diameters if needed. It is recommended to apply a thin layer of shafting epoxy during insertion and then cut to length using The GolfWorks Mini Hacksaw or similar type hacksaw. “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”

Aluminum Golf Club Shaft Extensions For Steel Shafts

Post author By
Post date July 20, 2026
No Comments on Aluminum Golf Club Shaft Extensions For Steel Shafts

Aluminum Golf Shaft Extensions Stafford Golf Store Aluminum Shaft Extensions for steel golf shafts have been re-designed to achieve a much tighter size tolerance. The Aluminum Extensions are designed to perfectly fit most steel shafts with a .600” butt diameter but can be sanded to fit shafts with slightly smaller butt diameters if needed. Durable and the 3” extended length can be easily cut to finished length using the GolfWorks Mini Saw.

New Double Sided Grip Tape Golf Club Gripping Adhesive Sizes Available

You Are Purchasing a Brand New The GolfWorks Industry Standard Grip Tape The industry standard tape for installing slip-on or leather grips. Sticky on both sides and activated with solvent. Choose from 18mm wide for spiral winding or 48mm wide for faster length-wise application (preferred by most clubmakers). Available in 36 yard rolls, 18 yard rolls and 10″ pre-cut strips.SIZE OPTIONS:2″ x 36 yard roll (Actual width 48mm) 1″ x 36 yard roll (Actual width 18mm)2″ x 18 yard roll (Actual width 48mm)2″ x 10″ strips (Actual width 48mm) “For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”

Golf Club Graphite Shaft Extensions Standard Graphite Shafts .600″ Butt Diameter

The GolfWorks graphite shaft extensions for standard graphite shafts. The GolfWorks graphite shaft extensions for standard graphite shafts. The GolfWorks Graphite extensions are made of a precise mixture of injection-molded Nylon (70%) and carbon fiber (30%) for strength and durability and feature a 2″ insertion depth. The post OD is .500″ and can be sanded to fit most smaller ID graphite shafts.Features:5″ total length with 1/2″ and 1″ pre-scored measuring lines for quick and precise extended lengthsDeep vertical grooves allow for greater epoxy adhesion. Vertical grooves also allow for additional sanding without sacrificing epoxy adhesionMade from Nylon and carbon fiber for added strength”For our valued international customers, please be aware that all customs-related responsibilities are the customer’s responsibility.”