Item Tag: Gray

TxChemist combines the best of tungsten with the best of tape to insure the optimum adhesion of Tungsten tape to almost any surface in any weather. What you get: Flexible weight in 0.3 gram increments on the single row tape or 1 gram increments on various lengths of 3 row chip tape. Strips of the best 3M VHB tape for this application are used in the manufacturing of our tape. Performance: the double-sided tape is resistant to UV light, moisture, solvents, and chemicals to ensure perfectly sealed bonds. It also resists high-range, hot and cold temperature cycling. This means the problems most other tungsten tape suppliers have encountered are solved with this more expensive engineered system. TxW tungsten tape is made from a composite of 3M industrial VHB tape and small tungsten square chips, about 3 chips per gram. A 5″ strip will weigh a minimum of 10 grams 5″ of TxW tungsten tape with single row of chips 3″ and 1.5″ of TxW tungsten tape with 3 rows of chips. This tape is 6X the typical lead tape weight per inch and double the rubber tungsten products. You can bend the strip back and cut it apart between any row you like to get 1 gram increments. You can cut one row up into 3 chips to get a 1/3 gram (0.01 oz) accuracy. You can cover the chips with scotch tape or just about anything if you need to have a smooth surface. Tungsten chips covered with clear scotch tape on 3M VHB tape You can place the tape directly on the surface you want buy peeling off the 3M backing cover. Do not handle the sticky surface, just place it where you want and wait 4 hours before using. A much stronger bond to raw, uneven wood is formed if we first put down a layer of metal tape ( not included) followed by the 3M composite- as shown with the band to the right of raw tape to wood.The following construction passed multiple shock and extreme deceleration testing.