The GolfWorks Putter Hosels The GolfWorks Putter Hosels fit all putter heads with a .370″ hosel bore diameter and a 90° bore angle. The hosels are 100% CNC milled and available in 4 different lengths 1″, 2.5″, 3″ and 3.5″. The lightweight aluminum hosels have a matte black PVD finish and the heavier Carbon Steel hosels have a dark chrome (dark gray) finish. The bottom stem of each putter hosel has a milled flat edge for air/epoxy relief during assembly. Each hosel features a 1/2″ offset however, the actual offset of the installed hosel is relative to the distance the hosel bore of the putter is from the leading edge of the putter. All of the hosels are bendable for custom loft and lie angles100% CNC milledAluminum hosels (black) available in 1″ (12g), 2.5″ (14g), 3.0″ (16g) and 3.5″ (18g) lengthsCarbon Steel hosels (dark gray) available in 1″ (35g) and 3.0″ (47g) lengths. All hosels can be bent for loft and lie adjustmentsEliminates the need for double bend putter shaftsFits putters with a .370″ bore diameter and a 90° bore angle1″ hosel creates a toe hang of approximately 20 degrees depending on build specifications2.5″ to 3.5″ hosels create a toe hang of approximately 10 degrees depending on build specificationsAll hosels are available in RH only
Innovative Solutions by AgTronics